Chief Delphi - Code to know if Kinect is attached

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Code to know if Kinect is attached (http://www.chiefdelphi.com/forums/showthread.php?t=105308)

Thad House

01-04-2012 22:17

Code to know if Kinect is attached

Is there any code in LabVIEW that shows that the kinect is attached to the driver station? We want to implement kinect for championships, but this information would be very helpful for us.

RufflesRidge

01-04-2012 22:26

Re: Code to know if Kinect is attached

Quote:

Originally Posted by sst.thad (Post 1152636)

Is there any code in LabVIEW that shows that the kinect is attached to the driver station? We want to implement kinect for championships, but this information would be very helpful for us.

Your best bet is probably to use the player output (I don't recall which VI it comes from, I think Kinect Header) and checking if it is 1 or 0.

Thad House

01-04-2012 22:44

Re: Code to know if Kinect is attached

Ill try that. That's a good idea

rachelholladay

02-04-2012 10:01

Re: Code to know if Kinect is attached

1 Attachment(s)

When you plug the Kinect's usb cable in from the field your driver station will show it connected. The screenshots attached explain further.

All times are GMT -5. The time now is 00:46.