Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   CAD (http://www.chiefdelphi.com/forums/showthread.php?t=105424)

thenomnivore 05-04-2012 00:14

CAD
 
So i recently decided to take up CADing software and try to see if I can create my robot in the later laters in this type of format.
Im asking from anyone to give any helpful tips, advise etc....
I wanna be cool like you guys :D

Akash Rastogi 05-04-2012 00:26

Re: CAD
 
Always great to see more people take on learning CAD!

What software are you starting out with?

Good luck, and always feel free to search for answers and post questions on here.

Peck 05-04-2012 00:33

Re: CAD
 
Hey, welcome to the CAD family.

Many questions you may have have answers in the CAD section of the forums (you may need to search long spans of time to get some answers) and you will likely find answers to questions you never thought to ask. If the question hasn't been asked (or not asked recently enough to apply to the current version) then feel free to ask In that section. For software specific questions, it is often best to ask in the specific sub forum for that software.

thenomnivore 05-04-2012 00:54

Re: CAD
 
I feel so welcomed :')
im using auto desk Inventor fusion.....it seems like the simpliest

MattC9 05-04-2012 00:55

Re: CAD
 
I have started some previous threads here on similar CAD subjects, I'll post them here when I can get on a CPU and find them. Or I will just PM you.

thenomnivore 05-04-2012 01:04

Re: CAD
 
Quote:

Originally Posted by MattC9 (Post 1154451)
I have started some previous threads here on similar CAD subjects, I'll post them here when I can get on a CPU and find them. Or I will just PM you.

ohhh thank you that ll be helpful!

Colin P 05-04-2012 01:57

Re: CAD
 
CAD ALL the things!

http://students.autodesk.com/

Ninja_Bait 05-04-2012 06:20

Re: CAD
 
I found the autodesk tutorials to be fantastic. Inventor is super intuitive and is really easy to use for FRC applications.

Good luck!

thefro526 05-04-2012 07:32

Re: CAD
 
Quote:

Originally Posted by thenomnivore (Post 1154450)
I feel so welcomed :')
im using auto desk Inventor fusion.....it seems like the simpliest

Just a tip, I use Inventor at my day job most days of the week and use it quite a bit for side projects and robotics. Personally, I try and recommend that you try to stay away from the Fusion aspects of Inventor unless you're looking to draw simple parts to convey ideas. Otherwise, Inventor is a great program, I learned it back in 2008 or so by pressing F1 every time I had a problem...

Clark Pappas 05-04-2012 13:46

Re: CAD
 
I would make it as close to your real bot as you can without at extraneous detail, and then if you want to, come back and clean it up. Check part libraries for any COTS parts before you try to do it yourself (Unless your doing it just to practice). Also, try to keep your CAD libraries and folders organized and properly labeled and named, it can get messy really fast. I find it helpful to have a library full of the CAD models for COTS electronics and fasteners like standard bolt sizes, the core electronics system, KoP Items, and so on. I use SolidWorks, and not inventor, so I don't know where you can find a parts library; if someone else on here knows the link, can you post it?


P.S. If you get a chance to try out SolidWorks, take it for a spin. I prefer it to inventor, I think the interface and controls are a little more intuitive. Just my $0.02

BigJ 05-04-2012 13:53

Re: CAD
 
Figured I'd post in here instead of making a new thread:

1675 is looking to build a couple computers since the ones at our school, well, stink :) .

I'm just checking that my assumption is right -- CAD programs are mainly GPU and RAM intensive right? Just basing this off 3D games. Or does it do a lot of calculations off the GPU so we need a beefy processor?

(Bonus points if you can confirm that 3DSMax has the same properties, we're looking to dual-purpose these as animation machines)

Thanks!

Clark Pappas 05-04-2012 13:55

Re: CAD
 
Quote:

Originally Posted by BigJ (Post 1154583)
Figured I'd post in here instead of making a new thread:

1675 is looking to build a couple computers since the ones at our school, well, stink :) .

I'm just checking that my assumption is right -- CAD programs are mainly GPU and RAM intensive right? Just basing this off 3D games. Or does it do a lot of calculations off the GPU so we need a beefy processor?

(Bonus points if you can confirm that 3DSMax has the same properties, we're looking to dual-purpose these as animation machines)

Thanks!

As far as I know, you are correct. Be sure you get a workstation/professional videocard and not a mainstream gaming one if you are look for serious power. Others know way more about this than me, so I'll leave the suggestions on particular brands and models to them.

MichaelBick 05-04-2012 13:59

Re: CAD
 
Try to stay with either inventor or solidworks. Inventor is nice because it is free. I have heard good things of solidworks, and it makes 20 times nicer renderings.

BigJ 05-04-2012 14:00

Re: CAD
 
Well one will hopefully be using the GTX 550(? 580? I forget) that we got for free from nVidia at the Midwest Regional last year (thanks nVidia!) :D

Clark Pappas 05-04-2012 14:08

Re: CAD
 
If I recall correctly Nvidia gave away GTX480's. You could probably use it, the things got some beef to it (I run decently on my home computers GTX460 and my laptops GTX555m), it's just if you are purchasing something, get a workstation card. But, if it's free, take whatever you can get :D

Also:
http://www.surveymonkey.com/s.asp?u=91132550276

Apply to this, and you can get several copies of SolidWorks for free. I spent about 10-15 minutes on this survey, and we got 20 team copies of SolidWorks within 2 weeks.


All times are GMT -5. The time now is 20:13.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi