Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Off-Season Events (http://www.chiefdelphi.com/forums/forumdisplay.php?f=20)
-   -   2012 IRI Predictions (http://www.chiefdelphi.com/forums/showthread.php?t=106489)

Duke461 19-06-2012 00:18

Re: 2012 IRI Predictions
 
461 Overhang (~16 inches)

-Duke

jwfoss 19-06-2012 07:22

Re: 2012 IRI Predictions
 
Correction:
2168 .Long.. Stinger In

Chris Hibner 19-06-2012 07:41

Re: 2012 IRI Predictions
 
Quote:

Originally Posted by Gregor01 (Post 1174504)
Is it inside or outside the frame perimeter?

Inside. Just barely.

JohnSchneider 19-06-2012 10:13

Re: 2012 IRI Predictions
 
3310 stinger 'out' though it does touch our bumper in the front ;o

IndySam 19-06-2012 11:13

Re: 2012 IRI Predictions
 
829 short 12" overhang and I just found a 24" cylinder while moving our shop :)

Travis Hoffman 19-06-2012 11:30

Re: 2012 IRI Predictions
 
2826 is STINGER IN, unless they've modified their bot since I last saw them.

3193 is OVERHANG+.

1023 is STINGER OUT, from the MARC thread.

548 is STINGER IN..OVERHANG, from the MARC thread.

M. Mellott 19-06-2012 12:42

Re: 2012 IRI Predictions
 
Quote:

Originally Posted by Travis Hoffman (Post 1174545)
3193 is OVERHANG+.

Beat me to it--thanks Trav!

Jared Russell 19-06-2012 13:12

Re: 2012 IRI Predictions
 
341 is wide, has an inside-the-frame-perimeter stinger, can hang up to 10" off the edge (requiring a total of 18" of real estate on the bridge when we go up in the rear - not including bumpers, which are low on our leading edge to get under any high bumpers in front of us), and has software brakes.

IKE 19-06-2012 13:17

Re: 2012 IRI Predictions
 
I predict at least 1 team unbalancing a bridge while attempting to show off their brand new stinger... So far I have seen at least 1 team unbalance a bridge in order to show their stinger at each event I have attended.

MNellist 20-06-2012 09:31

Re: 2012 IRI Predictions
 
340 is STINGER OUT with OVERHANG+

Gregor 20-06-2012 13:26

Re: 2012 IRI Predictions
 
Stolen from http://www.chiefdelphi.com/forums/sh...0&postcount=62 and applying to IRI (Thanks Travis Hoffman)

STINGER OUT - Stinger of any kind applied outside of frame perimeter
STINGER IN - Stinger of any kind applied inside frame perimeter
BRAKES - Braking/stay put system - mechanical brakes, pneumatic pad onto bridge surface, etc.
PID BRAKES - Deserves its own category if no other mechanical braking present, as control stops once match ends.
OVERHANG(+) - Can hang at least 12" of robot off the bridge. Use OVERHANG+ if you have additional features to secure the bot that don't fall into any other category - wood blocks, wedges, tilting arm to affect COG :-), etc.


16 ...Swerve..
25 ...Long..Stinger In..Brakes
27 ...Long..
33 ...Wide..Stinger Out
45 ...Wide..
48 ...Long..Stinger In..Overhang+
51 ...Wide..Stinger In
67 ...Wide..Stinger Out
68 ...Wide..
71 ...Swerve..
111 ..Long..Stinger In
118 ..Wide..Stinger In
125 ..Long..
148 ..Wide..Stinger In
192 ..Long..
217 ..Long..Stinger In..Overhang+
233 ..Long..
234 ..Wide..
245 ..Wide..
269 ..wide..
292 ..wide..
330 ..Long..Stinger In
340 ..Long..Stinger Out..Overhang+
341 ..Wide..Stinger In..10" Hang..PID Brakes
359 ..Long..
379 ..Long..
399 ..Wide..
447 ..Long..
461 ..Long..Overhang
469 ..Square..Stinger Out
503 ..Mecanum..
548 ..Long..Stinger In..Overhang+
573 ..Long..
624 ..long..
744 ..Long..
772 ..Long..Overhang
781 ..Long..
829 ..Wide..Overhang
868 ..Square..
907 ..Wide..Stinger Out..PID Brakes
973 ..Swerve..Stinger Out..Brakes
1023 .Wide..Stinger Out
1024 .Wide..
1114 .Long..Stinger In, PID Brakes, Overhang+
1538 .Long..
1592 .Wide..
1640 .Swerve..
1676 .Long..Stinger In
1714 .Wide..
1718 .Wide..Stinger Out..Brakes
1730 .Wide..
1732 .Wide..
1741 .Mecanum..
1902 .Long..
2054 .Long..Stinger Out
2056 .Long..Stinger Out
2168 .Long..Stinger In
2194 .Wide..
2337 .Long..Stinger In..Overhang..Brakes
2590 .Wide..
2614 .Long..
2826 .Long..Stinger In
2834 .Wide..Stinger Out
2949 .Wide..
3098 .Wide..Stinger Out
3138 .Long..
3193 .Long..Overhang+
3310 .Long..Stinger Out
3322 .Wide..Stinger Out
3357 .Wide..
3940 .Wide..
3947 .Long..
4334 .Wide..

Gregor 22-06-2012 18:54

Re: 2012 IRI Predictions
 
We are still missing 37 teams! :ahh: Come on lets keep going :P

Joe Ross 22-06-2012 19:36

Re: 2012 IRI Predictions
 
Quote:

Originally Posted by MNellist (Post 1174639)
340 is STINGER OUT with OVERHANG+

Did you change your stinger since this video: http://youtu.be/Ar6CMCwlW5k ?

JJackson 24-06-2012 00:02

Re: 2012 IRI Predictions
 
781 has a fairly reasonable overhang.... currently we can take up as little as just over 20"..... if we have driven straight onto the bridge. (thanks to our polycord and sliders)
Our low gear pretty much works as a break when the robot is on (you can tip the bridge down and it hardly moves until you shut it off).

MNellist 24-06-2012 11:04

Re: 2012 IRI Predictions
 
Quote:

Originally Posted by Joe Ross (Post 1174988)
Did you change your stinger since this video: http://youtu.be/Ar6CMCwlW5k ?

No it has not changed however the stinger is connected to a bracket that is outside the physical frame but inside the bumpers. I guess it all depends on the definition of inside/outside the frame perimeter.


All times are GMT -5. The time now is 21:36.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi