Chief Delphi - 2012 Van Door Motor Circlip Goove

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - 2012 Van Door Motor Circlip Goove (http://www.chiefdelphi.com/forums/showthread.php?t=108300)

Spirator

12-09-2012 01:27

2012 Van Door Motor Circlip Goove

Hi, does anyone know what the diameter of the circlip groove in the 2012 van door motor is?

James Tonthat

12-09-2012 01:44

Re: 2012 Van Door Motor Circlip Goove

There was a van door motor in the 2012 kit?

DampRobot

12-09-2012 10:44

Re: 2012 Van Door Motor Circlip Goove

No, he's probably talking about one salvaged from a scrap yard. Usually, the groves are standard sizes based on the diameter of the shaft. If you know the diameter of the shaft, you can find out what e-clip or c-clip you need to use. Also, the depth and diameter of the groove could easily be measured with a pair of digital calipers.

Gary Dillard

12-09-2012 11:50

Re: 2012 Van Door Motor Circlip Goove

Quote:

Originally Posted by James Tonthat (Post 1185225)

There was a van door motor in the 2012 kit?

Yes there was, available from FIRST Choice

Gary Dillard

12-09-2012 11:59

Re: 2012 Van Door Motor Circlip Goove

Technical drawing of the Van Door from previous year's kit; I think the interfaces are the same for the ones they supplied last year:

http://www.usfirst.org/uploadedFiles...2016640238.pdf

James Tonthat

12-09-2012 12:10

Re: 2012 Van Door Motor Circlip Goove

Quote:

Originally Posted by Gary Dillard (Post 1185265)

Yes there was, available from FIRST Choice

My B. :)

All times are GMT -5. The time now is 05:28.