Error Codes Compilation
 

By any chance, does someone have a comprehensive list of all current error codes for the Driver Station? We managed to find a list on zone.ni.com, but it is all the way from Jan 2010 when the DS was introduced and capability was limited.

Re: Error Codes Compilation
 

You should post the link to that list, even if its a bit old.

Re: Error Codes Compilation
 

If you mean errors that show up in the Diagnostics tab, those don't come from the DS, but from the robot and would vary based on the language you are using. The errors are sent back to the DS via the status messages.

Greg McKaskle

Re: Error Codes Compilation
 

http://zone.ni.com/reference/en-XX/h...c_error_codes/

Re: Error Codes Compilation
 

This isn't an official 2012 list, but one I made myself from the 2012 FRC version of LabVIEW.
No promises about completeness.

Re: Error Codes Compilation
 

Well, that will help a lot!
By the by, where did you happen to look for these codes? Did you have to hunt through each and every VI?

And yes, we're still working with V2012.

Re: Error Codes Compilation
 

One place to get a list of LabVIEW errors is ...
C:\Program Files (x86)\National Instruments\LabVIEW 2012\project\errors\English.
Another is ...
C:\Program Files (x86)\National Instruments\LabVIEW 2012\resource\errors\English.

The text files contain errors for various products and toolkits that plug into LabVIEW. I'd assume the FRC ones in the first path are the primary ones you care about. 2011 and 32 bit path substitutions may be necessary.

Greg McKaskle

Re: Error Codes Compilation
 

My list was extracted from the XML at Greg's first link.
("2011" instead of "2012" because Greg gets to play with this season's LabVIEW version long before the rest of us. :) )

Re: Error Codes Compilation
 

Lol, yeah I meant 2011, but code/WPILib from 2012. Who can keep all these numbers straight, never mind me, no worse than EMD....

Thanks!