Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Electronics lattice for Team 842s entry in AUVSI Robosub (http://www.chiefdelphi.com/forums/showthread.php?t=110254)

falconmaster 28-12-2012 11:09
pic: Electronics lattice for Team 842s entry in AUVSI Robosub
 

Dan Richardson 28-12-2012 11:16
Re: pic: Electronics lattice for Team 842s entry in AUVSI Robosub
 
This has got to be one of the cooler looking, functional structures, I've seen with 3d printing. Kudos on the slick design!

Did you have the machines to build this in house or did you pursue a vendor/sponsor? Also, just out of curiosity, was there a specific reason the FDM technology was chosen and two different materials?

falconmaster 28-12-2012 12:32
Re: pic: Electronics lattice for Team 842s entry in AUVSI Robosub
 
Quote:
Originally Posted by Dan Richardson (Post 1205401)
This has got to be one of the cooler looking, functional structures, I've seen with 3d printing. Kudos on the slick design!

Did you have the machines to build this in house or did you pursue a vendor/sponsor? Also, just out of curiosity, was there a specific reason the FDM technology was chosen and two different materials?
I wish we had the machines, it was done for us at PADT, http://www.padtinc.com/
We did not ask for there to be two different materials. We have an email to them asking this very thing. It really doesn't matter to us as long as it does the job. Have you seen our AUV website? We are still working on this years AUV but if you look under previous you will see more https://sites.google.com/site/falcon...csauvteam/home

Thanks for commenting! By the way we used Autodesk!


All times are GMT -5. The time now is 13:03.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi