Chief Delphi - KOP CAD

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - KOP CAD (http://www.chiefdelphi.com/forums/showthread.php?t=110385)

ENIAC

03-01-2013 21:24

KOP CAD

Does anyone recall if Andymark had CAD files for the kitbot up soon after kickoff? Or is there another source?

Dad1279

03-01-2013 21:37

Re: KOP CAD

Most of AndyMark products have cad files. Go to the item, then on a tab next to the description will be tab for files & documents.

Mk.32

03-01-2013 21:52

Re: KOP CAD

Quote:

Originally Posted by Dad1279 (Post 1207109)

Most of AndyMark products have cad files. Go to the item, then on a tab next to the description will be tab for files & documents.

The new belt Kit of frame I do not think have been released yet. Probably because they don't want to confirm the size of the frame for this season until kick off....

Dad1279

03-01-2013 21:58

Re: KOP CAD

Quote:

Originally Posted by Mk.32 (Post 1207110)

The new belt Kit of frame I do not think have been released yet. Probably because they don't want to confirm the size of the frame for this season until kick off....

Yes. More specifically, AndyMark posts files for a majority of their items, both in cad files and PDFs.

With a little detective work, you can download 2013 KOP transmissions now.... ;)

jspatz1

03-01-2013 22:29

Re: KOP CAD

Autodesk usually posts Inventor files of nearly all KOP parts soon after kick-off. It is linked from the usfirst.org KOP page, or is here: http://students.autodesk.com/?nd=fir...12-LA-1-6-2012
Between these and the CAD files offered on each AndyMark product page, you should have nearly everything you need.

All times are GMT -5. The time now is 13:31.