Chief Delphi - Outside of the frame perimeter

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Outside of the frame perimeter (http://www.chiefdelphi.com/forums/showthread.php?t=110462)

Walter Deitzler

05-01-2013 15:43

Outside of the frame perimeter

I cannot seem to find where it says how far we can extend outside of the frame perimeter, when not in starting configuration, all I can find is in the example of rule G29:

Quote:

High speed accidental collisions may occur during the match and are expected. Robots extend elements outside of the frame perimeter at their own risk.

So does anybody know how far outside of the frame perimeter we can go?

GaryVoshol

05-01-2013 15:46

Re: Outside of the frame perimeter

Did you see the rule about the 54" cylinder? <G23>

Herbblood

05-01-2013 15:46

Re: Outside of the frame perimeter

As far as i know, all it says is that the robot cannot go outside of its 54in diameter.

Novatose

05-01-2013 15:47

Re: Outside of the frame perimeter

The way i see it,
You can extend as far as you want as long as your robot is always in coherence with the 54" diameter size limit, and the 60"-84" height limit.

Sean M

05-01-2013 15:48

Re: Outside of the frame perimeter

Agreed. [G23] sums it up for horizontal direction, and [G22] otherwise.

All times are GMT -5. The time now is 05:49.