Chief Delphi - Frisbee CAD

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Frisbee CAD (http://www.chiefdelphi.com/forums/showthread.php?t=110515)

Brian Selle

10-01-2013 13:06

Re: Frisbee CAD

Quote:

Originally Posted by anthonyttu (Post 1208962)

The models from PTC are done in Creo 2.0. Right now Inventor and Solidworks are unable to convert files made from Creo 2.0, PTC did make the new software available if you want to upgrade. I converted PTCs frisbee to an .ipt it works in Inventor 2012 and 2013.

Any chance you could you post this as a STEP file?

JesseK

11-01-2013 22:53

Re: Frisbee CAD

Anthony -- thanks for the attachment!

Saberbot

11-01-2013 23:03

Re: Frisbee CAD

Quote:

Originally Posted by btslaser (Post 1212326)

Any chance you could you post this as a STEP file?

Solid works should be ableto open an .ipt

watersnake

12-01-2013 14:09

Re: Frisbee CAD

Quote:

Originally Posted by Max Meaker (Post 1209617)

The model of the Frisbee that I posted earlier is apparently incorrect.

I'm sure there is correct model of the Frisbee already for Creo and Inventor, but for those of us using SolidWorks, I'll re post an updated CAD file of the Frisbee I modeled after I can get my hands on one to confirm which dimensions are correct.

Any idea which dimensions are correct? It seems that the ones FIRST posted are more accurate, but I want to make sure before I build anything.

EDIT: I've edited Max's frisbee model to correspond with the rules' dimensions of 10.625" dia and 1.25" hight.

Solidworks: https://www.dropbox.com/s/y00x59et89...Frisbee.SLDPRT

STEP: https://www.dropbox.com/s/fsq09z9wc0pxueh/Frisbee.STEP

Please let me know if this link does not work, or if anything is incorrect with the model.

MasterGravity

14-01-2013 17:07

Re: Frisbee CAD

I think that the diameter of the Step file is incorrect. I measured it in Inventor and got 11.16 for a diameter.

EricLeifermann

14-01-2013 19:46

Re: Frisbee CAD

Quote:

Originally Posted by anthonyttu (Post 1208962)

Can we get an STP file of this?

Max Meaker

14-01-2013 23:44

Re: Frisbee CAD

The dimensions in the game manual are incorrect. Corrections were made in the first team update.

Quote:

Team UPDATE - 2013-01-08
The DISCS are Wham-O part number 53214 (custom colored Red, White, or Blue) and have a nominal diameter of 11 in., a nominal height of 1.4 in., and a weight of 180 ± 5 grams.

Source: http://frc-manual.usfirst.org/Updates/0

Sorry if my first model has created any issues being that it was based off the wrong dimensions. Here's an updated model with the correct 11 in Diameter and 1.4 in height. Once again, the curvature of the Frisbee is approximate. Use at your own discretion. Hope this clears up any confusion.

Here's the .STEP file (right click and 'Save Link As')
http://dl.dropbox.com/u/99956340/Fri...01.4%20in.STEP

adengler

25-01-2013 01:53

Re: Frisbee CAD

Thank you, thank you. :)

All times are GMT -5. The time now is 21:04.

Page 2 of 2

Show 100 post(s) from this thread on one page