Chief Delphi - Axis Camera Anonymous connections?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Axis Camera Anonymous connections? (http://www.chiefdelphi.com/forums/showthread.php?t=110560)

dheerm

06-01-2013 14:10

Axis Camera Anonymous connections?

Quote:

You need to set the Axis Camera to allow anonymous connections when using it with the SmartDashboard.

This was in the updates for the 2013 control system. I was wondering why the axis camera wouldn't work with the smart dashboard after configuring it.

Could anyone please tell me how to go ahead and allow anonymous connections on the axis camera so we can do this? I've been wanting to drive our robots around school using the camera :)

Greg McKaskle

06-01-2013 20:40

Re: Axis Camera Anonymous connections?

From a computer that is connected to and on the same subnet as the camera, open a web browser and type in the camera IP address.

You should then be able to log in and view lots of camera configuration options.

The page that lets you add and remove users will also enable anonymous usage.

Greg McKaskle

dheerm

06-01-2013 20:47

Re: Axis Camera Anonymous connections?

Quote:

Originally Posted by Greg McKaskle (Post 1209353)

That's what I was thinking it was but I was not sure. Thanks :D

RufflesRidge

06-01-2013 20:47

Re: Axis Camera Anonymous connections?

This page shows how to do manual configuration below the stuff about the camera config tool.

dheerm

06-01-2013 20:50

Re: Axis Camera Anonymous connections?

Quote:

Originally Posted by RufflesRidge (Post 1209361)

This page shows how to do manual configuration below the stuff about the camera config tool.

Ok, thanks :)

All times are GMT -5. The time now is 02:13.