Chief Delphi - off CRIO on robot Vision processing and ports

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - off CRIO on robot Vision processing and ports (http://www.chiefdelphi.com/forums/showthread.php?t=110585)

PaulDavis1968

06-01-2013 18:36

off CRIO on robot Vision processing and ports

So if I use a odroid-u to do vision processing on the robot it should not matter what port I am using. I am routing on the robot. Is this correct?

Joe Ross

06-01-2013 19:57

Re: off CRIO on robot Vision processing and ports

See <R58>

PaulDavis1968

06-01-2013 20:09

Re: off CRIO on robot Vision processing and ports

Quote:

Originally Posted by Joe Ross (Post 1209306)

See <R58>

R58
Ethernet-connected COTS devices or custom circuits may connect to any remaining Ethernet port but must not transmit or receive UDP packets using ports 1100-1200 with the exception of ports 1130 and 1140.

Thanks.

All times are GMT -5. The time now is 02:08.