Using 2 Smartdashboard Clients at the Same Time
 

I don't have a robot in front of me to test with, but our team is going to be using the LabVIEW dashboard as our final dash (we'll have vision processing values sent back to the robot from it), and we'll be using smartDashboard to tune our PID Loops and debug the robot. Is it possible for both SmartDashboard and the LabVIEW dash to access smartdashboard values? If not, is it possible for the smart dashboard to access smartdashboard values, and the LV dash access different networkTables values? Thanks!

Re: Using 2 Smartdashboard Clients at the Same Time
 

I've used NetworkTables Viewer at the same time as either SmartDashboard or the LabVIEW Dashboard. I've also used the LabVIEW dashboard and SmartDashboard writing to different tables.

Re: Using 2 Smartdashboard Clients at the Same Time
 

I've used it too, with no issues. In fact, I had Java running on my Mac, LV running on my Windows VM, and the LV server was running on the cRIO. No issues once everything was on the correct subnet. Please let us know if you have any problems.

Greg McKaskle

Re: Using 2 Smartdashboard Clients at the Same Time
 

I've had no problems with multiple clients with NetworkTables. Thanks for the quick replies!