Chief Delphi - Pinions for BAG motors

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - Pinions for BAG motors (http://www.chiefdelphi.com/forums/showthread.php?t=110838)

Jared Russell

09-01-2013 16:52

Pinions for BAG motors

These guys have a 4mm shaft (unlike the 3.2mm 500 can shaft, 5mm 700 can shaft, .125" FP shaft, and 8mm CIM/mini-CIM shaft). So far the only COTS pinion solution I have found is to get the VexPro Versaplanetary Motor Mounting Kit, but I'm not sure what the tooth count/DP are, and it comes with a bunch of other mounting hardware.

Does anyone have a good source for standalone COTS pinions for these guys?

Paul Copioli

09-01-2013 17:01

Re: Pinions for BAG motors

Jared,

The motor mounting kit for the VersaPlanetary is not a gear. The VP has self contained sun gears and the mounting kit has couplers that couple to the VP input via a zero backlash coupler.

You can always drill and ream any of the .125" bore gears to work as a press fit for the 4mm.

Paul

Jared Russell

09-01-2013 17:03

Re: Pinions for BAG motors

Quote:

Originally Posted by Paul Copioli (Post 1211672)

Good to know. Yeah, we'll ream out .125 or 3.2mm pinions as necessary, just wanted to make sure there wasn't a COTS source for premade pinions that I was missing. Thanks.

All times are GMT -5. The time now is 05:21.