2013 SolidWorks KOP
 

We were wondering if anyone has the 2013 KOP as Solidworks files, if so can you share. We do not have any other cad systems other than SW.
Thanks!

Re: 2013 SolidWorks KOP
 

See the Autodesk Student community page on the Autodesk page. SW will read STEP files without a problem.

http://www.chiefdelphi.com/forums/sh...d.php?t=110483

Re: 2013 SolidWorks KOP
 

We are aware of this, however we are also having difficulty accessing this site, which is the issue.

Re: 2013 SolidWorks KOP
 

PM inventor_phild. He should be able to help you.

There may be a zipped file with all of that stuff somewhere on CD. I think I saw it. When or if I find it, i'll link it here.

Re: 2013 SolidWorks KOP
 

See if http://students.autodesk.com/ama//or...EP-Format1.zip works.

Re: 2013 SolidWorks KOP
 

Thanks to Nathan for helping with this.

Gaiice, if you are still having issues, email me privately and I will help you.

phil.dollan@autodesk.com

Re: 2013 SolidWorks KOP
 

Thanks Nathan!
Is there a translator available for using 3-D PDF's as a common language between Inventor, SW (& Creo?)
Tom G 4055

Re: 2013 SolidWorks KOP
 

Typically formats such as 3D PDF or 3D DWF are output from an application such as Inventor for use by someone in the design team who wants to mark up or view the design. The PDF or DWF has most of the 3D data stripped out. It may be useful for cheking but in general it does not work as you are requesting.

I will check further and let you know if I can find any more information. Email me privately if you do not hear from me in a couple of days.