Chief Delphi - First Year Team's Drive Train Done!!

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - First Year Team's Drive Train Done!! (http://www.chiefdelphi.com/forums/showthread.php?t=110948)

Lil' Lavery

11-01-2013 15:28

Re: First Year Team's Drive Train Done!!

First off, he said 32" x 25", not 35" x 25". But that doesn't invalidate your point, a 32"x25" frame has a 114" perimeter, 2" over the allowed 112" limit. But given that the kitbot rails are 30" long and 1" wide, 32" seems a very plausible length for the robot (30" + 1" on each end). Let's hope they cut their center width down to 24" or less rather than 25"! :ahh:

MetalJacket

11-01-2013 15:48

Re: First Year Team's Drive Train Done!!

Quote:

Originally Posted by Lil' Lavery (Post 1213157)

he said 32" x 25", not 35" x 25".

Oops, my mistake, will edit my post.

MentorPrice

11-01-2013 19:20

Re: First Year Team's Drive Train Done!!

Quote:

Originally Posted by MetalJacket (Post 1213138)

I hope not, those dimensions would not be a legal frame perimeter(32*2+25*2 = 114 > 112). I doubt that the kitbot (which I think you're using) would be illegal size though so I'm sure you're fine. Congrats on getting your FIRST ever robot up and running so early :).

Thank you and Im pretty sure the perimeter is 110 overall so 30"x23" is our dimensions and I understand the belts though. That aspect of it is very tough. I am use to the chains drive.

All times are GMT -5. The time now is 06:24.

Page 2 of 2

Show 100 post(s) from this thread on one page