Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: We're just rollin' along (http://www.chiefdelphi.com/forums/showthread.php?t=111189)

TylerM 13-01-2013 23:23
pic: We're just rollin' along
 

Andrew Lawrence 13-01-2013 23:24
Re: pic: We're just rollin' along
 
At first look I knew this was a 604 wheel. Simply amazing.

One question I have: It appears as if there is neither a key pattern nor hex pattern inside the wheel, and I can't find a place to put a sprocket on, so how are you going to drive the wheel? :confused:

TylerM 13-01-2013 23:27
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by Andrew Lawrence (Post 1214758)
At first look I knew this was a 604 wheel. Simply amazing.

One question I have: It appears as if there is neither a key pattern nor hex pattern inside the wheel, and I can't find a place to put a sprocket on, so how are you going to drive the wheel? :confused:
Thanks! We are going use a 1/2in hex broach, as soon as we get one.

JakeD 13-01-2013 23:32
Re: pic: We're just rollin' along
 
Whats the function of the 6 holes on the outside of the rim? Beautiful looking hubs though.

Cory 13-01-2013 23:34
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by Andrew Lawrence (Post 1214758)
At first look I knew this was a 604 wheel. Simply amazing.

One question I have: It appears as if there is neither a key pattern nor hex pattern inside the wheel, and I can't find a place to put a sprocket on, so how are you going to drive the wheel? :confused:
Hasn't been broached yet.

TylerM 13-01-2013 23:35
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by JakeD (Post 1214766)
Whats the function of the 6 holes on the outside of the rim? Beautiful looking hubs though.
The wheels are two halves and the tread is clamped in between. The 6 holes attach the two halves.

waialua359 14-01-2013 01:31
Re: pic: We're just rollin' along
 
Looks great!
Very similar to our setup as we just completed our "X" inch 2 piece wheels also.

ctccromer 14-01-2013 09:19
Re: pic: We're just rollin' along
 
stick some spinners on there and youre good to go!

Gregor 14-01-2013 09:54
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by waialua359 (Post 1214811)
Looks great!
Very similar to our setup as we just completed our "X" inch 2 piece wheels also.
Woh, you have variable diameter wheels! :rolleyes:

teachsail 14-01-2013 21:41
Re: pic: We're just rollin' along
 
Ooohhh seven wheel drive! Every year I try to talk my team into 7 wheel drive. lol.

They are so pretty spinners are not needed. Can I get a set of four in 18 inch for my truck.

Gregor 14-01-2013 21:50
Re: pic: We're just rollin' along
 
Are you taking advance orders? :rolleyes:

Mongai 14-01-2013 21:52
Re: pic: We're just rollin' along
 
We were wondering on where you were planning on ordering your belts and what the lead time on ordering them was?

Nuttyman54 14-01-2013 21:58
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by Gregor (Post 1214858)
Woh, you have variable diameter wheels! :rolleyes:
Crazily enough, these do actually exist...

Eugene Fang 14-01-2013 23:35
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by teachsail (Post 1215356)
Ooohhh seven wheel drive! Every year I try to talk my team into 7 wheel drive. lol.

They are so pretty spinners are not needed. Can I get a set of four in 18 inch for my truck.
Actually, there are 13 in that picture. ;)

TylerM 14-01-2013 23:42
Re: pic: We're just rollin' along
 
Quote:
Originally Posted by Mongai (Post 1215394)
We were wondering on where you were planning on ordering your belts and what the lead time on ordering them was?
We are using chain


All times are GMT -5. The time now is 07:24.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi