pic: Sacrificed Disc
 

Re: pic: Sacrificed Disc
 

... My team who is having money issues is looking at this like your insane. Those are 5.50 each what could you be doing that requires half a disk?

Re: pic: Sacrificed Disc
 

How are the frisbees holding up for everyone during prototyping? They seem to get marked up quickly, anyone experience any significant damage?

Re: pic: Sacrificed Disc
 

We are seeing plenty of scuffing, but nothing other than surface level.

Re: pic: Sacrificed Disc
 

On the grand scale of FRC (where the average mid-level team's budget could buy a respectable car), a $5.50 expenditure (especially when you have spares on hand) is not a big impact when you know it'll make a difference. We've been known to run up the street to a Firehouse Subs to get a couple of their $2 pickle buckets for prototyping material in a hurry.

Re: pic: Sacrificed Disc
 

Oh, is that what we are supposed to tell the school accountants it was for?!

I thought "Food for Thought" was appropriate. :P

On topic:

Why is a FRC specific Frisbee required, as opposed to a cheap $1 one?

Re: pic: Sacrificed Disc
 

Because it is an ultimate Frisbee disk. They are heavier then $1 ones

Re: pic: Sacrificed Disc
 

Good point. I was only thinking about the shape and size, not the weight.

Re: pic: Sacrificed Disc
 

Yes: the frisbees become substantially harder to grip onto with every scratch and wear, making things all but impossible for ground pickup as we have prototyped, and less accurate for the shooter. Also warping of the discs can be a problem.

Re: pic: Sacrificed Disc
 

I drove over a couple using last year's drive train and purposefully got them stuck in the chains. They are scratched up, but all in all ok. I also propped one up against an immovable object and rammed into it with the robot, it didn't break.

I'd say that we'll be seeing a lot of scuffing this year, but not a lot of breaking.

Our prototype (using a belt at the time) put a pretty deep gash in the frisbee. There was too much compression between the wall an the belt, and when the disk stopped, the belt just melted throught through the disk like butter.

Re: pic: Sacrificed Disc
 

I don't know if this is a good place to discuss this, but what do you guys think the life cycle for the frisbees will be in competition?

Re: pic: Sacrificed Disc
 

Scuffing might be worse than breaking, because the flight path will still be altered and the field crew will be instructed to leave it on the field.

Re: pic: Sacrificed Disc
 

The only real damage that we have seen in testing is when we had a wheel start melting through a frisbee when it got stuck in our launcher. scuffing and warping of our frisbees is not altering our shots much, if at all, but they sure do look nasty in some places!

one tip- if you cover a wheel in something extra: dont use gaffers tape as your outer layer. yeah, its really strong and doesnt wear much, but its REALLY slick, way more than we thought, and it will not grab frisbees at all. just a thought, maybe it will save someone some time.

Re: pic: Sacrificed Disc
 

Can you cite the rule on this?

Re: pic: Sacrificed Disc
 

I'm anticipating FIRST's actions. Do you really expect them to replace every disk that went through a shooter just once?

Re: pic: Sacrificed Disc
 

It's right after the rule that grants the FTA the right to breathe:p

Seriously, the rules aren't an exhaustive list of how everything in and around the field should happen. Some things are just common sense.

Re: pic: Sacrificed Disc
 

Based on last years ball quality control, no. I can only see the Frisbee being replaced if it is broken, and before eliminations.