Chief Delphi - Issues with servo

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Issues with servo (http://www.chiefdelphi.com/forums/showthread.php?t=111431)

Bruno#1382

17-01-2013 07:07

Issues with servo

hy guys we are having some troubles with the servo library and the Servo motor we don't know if we are getting the wrong vi's or the motor isn't working

we use this squeme

Open>Set ref>Get>Set angle

Greg McKaskle

17-01-2013 07:21

Re: Issues with servo

Check the digital breakout board. You need a jumper next to the PWM to provide the correct voltage to the servo -- unfortunately. Also, make sure to run the DS and enable the robot.

Greg McKaskle

All times are GMT -5. The time now is 10:49.