Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   FRC Blogged - Revised Q&A Answers (http://www.chiefdelphi.com/forums/showthread.php?t=111516)

Hallry 18-01-2013 06:58

FRC Blogged - Revised Q&A Answers
 
Taken from the FRC Blog, 1/18/13: http://www.usfirst.org/roboticsprogr...-and-a-answers

Quote:

Revised Q&A Answers

Blog Date: Thursday, January 17, 2013 - 14:51

I wanted to make you aware that we had to revise four answers to submitted questions to the Q&A (Q97, Q98, Q107 & Q150). The questions dealt with one robot lifting another in an attempt to earn climb points. After further internal discussions, we realized that the original answers were not consistent with the intent or the wording in the manual. Section 3.1.5.2 says the robot must contact the pyramid during ascent. Robot ‘A’ may lift Robot ‘B’ to earn climb points, but Robot ‘B’ must contact the pyramid levels in sequential order to earn climb points. Contact means just what you expect it would – ‘touch’. Weight bearing is not required.

As with all my comments on rules, this blog is not an official rules source. However, if you look at the revised answers to the Q&A questions linked above, and look closely at the manual, I think this will make sense to you.

Our apologies for any confusion, and we thank you for your understanding.



I’ll blog again soon.

Frank



All times are GMT -5. The time now is 23:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi