Chief Delphi - Using other solenoids with the solenoid breakout board

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Using other solenoids with the solenoid breakout board (http://www.chiefdelphi.com/forums/showthread.php?t=111669)

ENIAC

20-01-2013 10:06

Using other solenoids with the solenoid breakout board

This year we are at long last allowed to use solenoid linear actuators. However, are we allowed to power them via the Solenoid breakout?

Mark McLeod

20-01-2013 10:32

Re: Using other solenoids with the solenoid breakout board

See R52, in the Table 4-4 Legal Power Regulating Device Use.
Electric solenoids can be powered by either a Spike or the solenoid breakout.

Just be careful of overloading the solenoid breakout

Quote:

R70
Outputs from each Solenoid Breakout shall not cumulatively exceed 16W for the cRIO-FRC (8-slot) and 21W for the
cRIO-FRC II (4-slot).

All times are GMT -5. The time now is 11:23.