Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Corner bracket (http://www.chiefdelphi.com/forums/showthread.php?t=111922)

TheGuyz 23-01-2013 21:56

Corner bracket
 
What level is the corner bracket that connects the horizontal bar to the vertical leg of the pyramid counted as?

WileyB-J 23-01-2013 22:12

Re: Corner bracket
 
Does this answer your question?


TheGuyz 23-01-2013 22:21

I just want to make sure that the bracket is part of the lower level. The picture shows that it is. But I just want confirmation.

WileyB-J 23-01-2013 22:31

Re: Corner bracket
 
Quote:

Originally Posted by TheGuyz (Post 1220887)
I just want to make sure that the bracket is part of the lower level. The picture shows that it is. But I just want confirmation.

Here's a question (that I believe is what you're asking) from the Official Q&A:
In the Q&A

Follow that for an official answer.

Cheers

TheGuyz 23-01-2013 22:45

So, do you know if the corner bracket is part of the lower level or higher level?

engunneer 24-01-2013 00:26

Re: Corner bracket
 
It should be clear from the drawing, but the bracket is below the top surface of the horizontal rung, so it is at the same level as the horizontal rung it is holding.

I don't get why the zone borders are so misunderstood. Any metal below the plane tangent to the tops of the first rung is in level 1. Any metal below the plane that sits on top of the second rung (and is not part of level 1) is part of level 2. All remaining metal in the pyramid is part of level 3.

Hope this helps.


All times are GMT -5. The time now is 23:59.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi