Chief Delphi - Bumper Height

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Bumper Height (http://www.chiefdelphi.com/forums/showthread.php?t=112047)

nickhilgupta

25-01-2013 17:53

Bumper Height

The rule says the bumpers have to be entirely within the 2 and 10 inch window. Does that mean the bumpers have to be 8 inches or can they be any height as long as its in that 8 inch window?

Hallry

25-01-2013 17:55

Re: Bumper Height

See rule R24.

FrankJ

25-01-2013 19:03

Re: Bumper Height

Bumpers are 5" per rule. They have to be totally in the bumper zone. A wise builder would not have the top right at 8" (10" actually thanks Jim) or the bottom right at 2".

Jim Wilks

25-01-2013 19:27

Re: Bumper Height

Quote:

Originally Posted by FrankJ (Post 1221894)

Bumpers are 5" per rule. They have to be totally in the bumper zone. A wise builder would not have the top right at 8" or the bottom right at 2".

I think you mean 10" for the top.

wonder-weasel

25-01-2013 20:53

Re: Bumper Height

Quote:

Originally Posted by FrankJ (Post 1221894)

Bumpers are 5" per rule. They have to be totally in the bumper zone. A wise builder would not have the top right at 8" (10" actually thanks Jim) or the bottom right at 2".

Agreed. I'm the bumper master on our team and depending on how you plan on fastening them to the chassis, they sag. I recommend making a guide out of plywood and running it around the bot to see if the bumpers fit within the zone.

All times are GMT -5. The time now is 06:36.