pic: 3D printing for bracketry
 

Re: pic: 3D printing for bracketry
 

This is awesome!!!!! Would you be able to upload the CAD file and link it? :)

Re: pic: 3D printing for bracketry
 

Very neat and compact. I like it. =)

Re: pic: 3D printing for bracketry
 

We have a bracket for the other side also, and we'll get the whole thing up in a day or so.

Re: pic: 3D printing for bracketry
 

And I thought that 1939 had theirs pretty good...

Re: pic: 3D printing for bracketry
 

That is sooo cool!

Re: pic: 3D printing for bracketry
 

Thats gorgeous!

Re: pic: 3D printing for bracketry
 

That is awesome, and putting the DSC over those unused ports is a great idea (never even crossed my mind!)

Re: pic: 3D printing for bracketry
 

Almost makes me want to run an 8-slot cRio.

Re: pic: 3D printing for bracketry
 

I had considered doing something like this last year but we never got around to designing or building it. Looks really cool.

Re: pic: 3D printing for bracketry
 

Does the bracket snap in like other modules, or is there other method for securing it?

Re: pic: 3D printing for bracketry
 

One of the kids came up with the idea last year, where we elegantly implemented it with electrical tape, but I think it left a bad taste in everyone's mouth. This year we are adding 3d printing to our tools bag, and our wonderful new mentor is an expert in this stuff.

The brackets snap-fit from the outside, He is also creating a bottom plate to keep the DSC from falling down into the cRIO.

Re: pic: 3D printing for bracketry
 

In a pinch you can take some soft wood and lightly tap it into the cRio. The wood'll form to the contours of the chassis. (Word of warning - if you go with that, I suggest you put all the rubber caps on unused ports.)

Re: pic: 3D printing for bracketry
 

Can you post the .stl file?

Thanks,
Wiley

Re: pic: 3D printing for bracketry
 

I really like this setup, unfortunately no room for a solenoid module. :(