Chief Delphi - pic: frc 2200 chassis

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: frc 2200 chassis (http://www.chiefdelphi.com/forums/showthread.php?t=112194)

CalTran

27-01-2013 19:53

Re: pic: frc 2200 chassis

Quote:

Originally Posted by Tristan Lall (Post 1222949)

Look closely at the small plate: the other 2 go inside the frame.

That's an...interesting concept. Will an enlightenment as to why be following soon? Just a space saver?

(Funnily enough, passed my Simbotics post without even knowing it.)

Bochek

27-01-2013 20:39

Re: pic: frc 2200 chassis

Quote:

Originally Posted by CalTran (Post 1222972)

That's an...interesting concept. Will an enlightenment as to why be following soon? Just a space saver?

There was not enough room to fit 3cim's and a shifting piston all on the inside. It was a simple matter of how to make it all fit. With the reduced dimensions of the robot this year, a standard 3/4" bore 1/2" stroke bimba piston was too long to fit we redesigned to use a shorter "flat line" piston.

All times are GMT -5. The time now is 17:14.

Page 2 of 2

Show 100 post(s) from this thread on one page