Chief Delphi - pic: Mini CIM with 20th GT2 3mm Pulley

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Mini CIM with 20th GT2 3mm Pulley (http://www.chiefdelphi.com/forums/showthread.php?t=112221)

Mk.32

28-01-2013 00:17

pic: Mini CIM with 20th GT2 3mm Pulley

loading photo ...

wilsonmw04

28-01-2013 00:18

Re: pic: Mini CIM with 20th GT2 3mm Pulley

would having the motor so close to the bridge cause problems with your wireless connection?

Mk.32

28-01-2013 00:25

Re: pic: Mini CIM with 20th GT2 3mm Pulley

Quote:

Originally Posted by wilsonmw04 (Post 1223149)

would having the motor so close to the bridge cause problems with your wireless connection?

We soon realized this... and plan on moving the router else where.

Also thanks to FRC 1538 for the broaching!

ttldomination

28-01-2013 09:46

Re: pic: Mini CIM with 20th GT2 3mm Pulley

Oh man, is that an encoder?

We've been struggling to find a way to incorporate some sort feedback into our designs, but this is nice.

- Sunny G.

Mk.32

28-01-2013 23:14

Re: pic: Mini CIM with 20th GT2 3mm Pulley

There is an encoder mount on the other end of the belt, but we pretty much have a shaft with tapped end and then a screw on shaft (think bolt with no head) that goes into a KOP encoder (1/4) which is held in position with some stand offs.

All times are GMT -5. The time now is 07:50.