Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   New AM-2462 (http://www.chiefdelphi.com/forums/showthread.php?t=112264)

Peyton Yeung 28-01-2013 18:29
New AM-2462
 
So we got our shooter working this past weekend and we are using the stock spinboxes with a 1.21:1 ratio and with a cim and mini cim. Our disks are flying great. Has anyone else been looking at using the spinboxes?
http://www.andymark.com/product-p/am-2462.htm

Peyton

Andrew Lawrence 30-01-2013 19:55
Re: New AM-2462
 
Does anyone have assembly instructions for the Spinboxes? Ours appears to have the mounting screws interfering with the gears.

Akash Rastogi 30-01-2013 19:58
Re: New AM-2462
 
Quote:
Originally Posted by Andrew Lawrence (Post 1224850)
Does anyone have assembly instructions for the Spinboxes? Ours appears to have the mounting screws interfering with the gears.
The CAD files are available on the product page. This should be all you need. If not, email AM.

Ankit S. 30-01-2013 20:01
Re: New AM-2462
 
Our mounting screws interfered with the gears as well.

The CAD file states that there must be two washers between the motor and the gear. For some reason our SpinBox did not come with the washers, so we had to salvage some from the spares/older CIMS we had laying around.

Akash Rastogi 30-01-2013 20:04
Re: New AM-2462
 
Quote:
Originally Posted by BeltSanderRocks (Post 1224857)
Our mounting screws interfered with the gears as well.

The CAD file states that there must be two washers between the motor and the gear. For some reason our SpinBox did not come with the washers, so we had to salvage some from the spares/older CIMS we had laying around.
Notifying AM is a good idea. It would help them avoid this issue for other orders.


All times are GMT -5. The time now is 23:51.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi