Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   Jaguar "can't contact boot loader" (http://www.chiefdelphi.com/forums/showthread.php?t=112271)

NeonGiraffe 01-28-2013 09:33 PM

Jaguar "can't contact boot loader"
 
We got our shipment of the new black jags with the FRC logo and 3 out of 10 were bricked, can't be recovered, the lights don't turn on, they're completely dead.

Does anyone have a solution or should we give up and buy some more?

Ricky Q. 01-28-2013 09:39 PM

Re: Jaguar "can't contact boot loader"
 
Quote:

Originally Posted by NeonGiraffe (Post 1223608)
We got our shipment of the new black jags with the FRC logo and 3 out of 10 were bricked, can't be recovered, the lights don't turn on, they're completely dead.

Does anyone have a solution or should we give up and buy some more?

Feel free to contact us at support@vexrobotics.com or 903-453-0802 - we'll do our best to troubleshoot and if needed get replacements out to you.

Best,
Ricky

Mike Copioli 01-28-2013 10:11 PM

Re: Jaguar "can't contact boot loader"
 
Are you using a 2CAN or serial gateway?

NeonGiraffe 01-28-2013 10:30 PM

Re: Jaguar "can't contact boot loader"
 
2CAN

Mike Copioli 01-29-2013 10:09 AM

Re: Jaguar "can't contact boot loader"
 
Have you tried setting the 2CAN's bitrate to 500 kbps? The bricked state that you are observing is most likely the Jag stuck in boot loader.

Read this thread.

http://www.chiefdelphi.com/forums/sh...=2CAN+500+kbps


All times are GMT -5. The time now is 08:39 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi