Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   Convert 6-Pin NXT I2C to 4-Pin I2C (http://www.chiefdelphi.com/forums/showthread.php?t=112509)

bbuncher12 01-02-2013 10:20

Convert 6-Pin NXT I2C to 4-Pin I2C
 
Hi! We have multiple NXT sensors to plug into our one Digital Sidecar. The NXT sensors are I2C, but have six pins, the pin-out of which is linked to below. We are trying to run a six-pin sensor through the four I2C pins on the Sidecar next to the six-pin receptacle, but it is not working. We have tried running both grounds to "-", SDA to SDA, SCL to SCL, and 5v to 5v, leaving the ANA plug disconnected (programming assures us that they are not using the analog component, although this may be the problem). Have you ever tried doing this? If so, please let me know if we are doing this wrong. Thank you!

https://sites.google.com/site/mccolg...nd-nxt-sensors


All times are GMT -5. The time now is 08:01.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi