Re: Full Court Shooting: Over 80ft total distance
 

WOW! That is AWESOME YA'LL! Way to go. What kind of wheel are you using?

You all could make full court shots with no problem.

Re: Full Court Shooting: Over 80ft total distance
 

FTFY

I'll agree with Adam. Like most things it doesn't matter how much range you have if you can't hit anything or if it bounces out all the time.

Could be cool for demos though.

Re: Full Court Shooting: Over 80ft total distance
 

For those asking for specs here is a description (we can take a close up of things if you’d like to add those as well).
8” performance wheels (hex shaft) with wedgetop tread (http://www.andymark.com/product-p/am-0105.htm)
Custom 1:1.2 up conversion modulox gearbox – using VexPro ceramic coated aluminum gears driven with a single CIM
Flywheel is a 10” plywood saw blade with the teeth ground off & attached to the aluminum performance wheel – it also acts as a guide to keep the Frisbee flat as it travels around the wheel
Bottom outside wall is made of aluminum angle back notched every 1” and pop riveted to the polycarbonate
We line the inside of the outer wall with wedgetop
Another piece of aluminum angle is added to keep the discs flat – rivets are used to attaché both the wedgetop and top angle to the base wall – in ends up looking like this:
Compression of the outer aluminum wall is 15” the added wedgetop makes it about 14 5/8”
We made 10 out of 10 shots from 18’ last night
We can document the RPM of the wheel and accuracy later as well as provide some close up photos