Chief Delphi - pic: 3997 2013 Electronics

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 3997 2013 Electronics (http://www.chiefdelphi.com/forums/showthread.php?t=112636)

dodar

04-02-2013 09:59

Re: pic: 3997 2013 Electronics

How are the Talons working out compared to the Jaguars and the Victors?

midway78224

04-02-2013 10:03

Re: pic: 3997 2013 Electronics

Quote:

Originally Posted by dodar (Post 1227295)

How are the Talons working out compared to the Jaguars and the Victors?

They are working pretty good for us right now. We done most of our testing and they seem to work really good just for driving around and shooting. Our next testing will be to put it though some pushing matches with our other robots and see how they handle. It will give us a good idea as our practice bot uses jags and our competition bot is using talons.

Alan Anderson

04-02-2013 14:07

Re: pic: 3997 2013 Electronics

Quote:

Originally Posted by dodar (Post 1227291)

I would just be wary because the breakers on the PD Board are setup so that red and black opposite of each other are on the same breaker and if it pops, 2 would go down instead of just one.

I don't understand what you're saying here.

The Power Distribution Board is intended to be wired so that the red/power and black/return terminals for each breaker-protected branch circuit are adjacent, not opposite. Regardless, all of the black terminals are connected directly to the (-) battery terminal, and the breaker only interrupts current to the red terminal.

All times are GMT -5. The time now is 20:08.

Page 2 of 2

Show 100 post(s) from this thread on one page