Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   Anyone recognize this sensor? (http://www.chiefdelphi.com/forums/showthread.php?t=112684)

enrique 03-02-2013 17:03

Anyone recognize this sensor?
 
This is a sensor from a past FRC.
Does anyone recognize it?



I get the feeling it may be a compass.

MrForbes 03-02-2013 17:09

Re: Anyone recognize this sensor?
 
ha! I just found one of those Friday. It's from the old IFI control system, it's an RS-232 interface that plugs onto the robot controller module. I forget what it was used for.

It is NOT a sensor.

Mark McLeod 03-02-2013 17:15

Re: Anyone recognize this sensor?
 
It's a TTL to RS232 level converter.
It was used for serial communication with the CMUCam

enrique 03-02-2013 23:33

Re: Anyone recognize this sensor?
 
Interesting!
That big black chip has holes on the side and when you look in it looked like it had coils. That is why I thought it was a compass. I never would of guess it was a converter.

I'm actually looking through the old stock to see if I can find the HiTechnicCompass that is in the wpilib.h
The class has a link but the link is too old.

Thanks for the input guys.

dtengineering 03-02-2013 23:49

Re: Anyone recognize this sensor?
 
Quote:

Originally Posted by MrForbes (Post 1227023)
ha! I just found one of those Friday. It's from the old IFI control system, it's an RS-232 interface that plugs onto the robot controller module. I forget what it was used for.

It is NOT a sensor.

Oh, yeah... that darn thing. I remember wasting an hour or so trying to figure it out before realizing that the socket was a socket and not an IC.

I would have done it again if you hadn't posted this! :)

Although I have to admit, it wasn't quite so blurry and out of focus when I last saw one... (a note to the OP, sometimes you are better to move the camera back a bit and get a "smaller" picture with less blur when you want to convey detailed information.)

Jason

enrique 04-02-2013 00:36

Re: Anyone recognize this sensor?
 
Quote:

Originally Posted by dtengineering (Post 1227193)
Oh, yeah... that darn thing. I remember wasting an hour or so trying to figure it out before realizing that the socket was a socket and not an IC.

I would have done it again if you hadn't posted this! :)

Although I have to admit, it wasn't quite so blurry and out of focus when I last saw one... (a note to the OP, sometimes you are better to move the camera back a bit and get a "smaller" picture with less blur when you want to convey detailed information.)

Jason

Yea moving back didn't help actually. I recently got this camera and havent really stopped to explore the modes and all that. I think it was in the wrong mode.

Joe Ross 04-02-2013 11:46

Re: Anyone recognize this sensor?
 
Quote:

Originally Posted by enrique (Post 1227178)
I'm actually looking through the old stock to see if I can find the HiTechnicCompass that is in the wpilib.h
The class has a link but the link is too old.

I don't think the HiTechnic Compass was ever included in the kit. It is a NXT sensor that connects via I2C. Here is the current link: http://www.hitechnic.com/cgi-bin/com...on&key=NMC1034

If you have a local FLL team, them may have one.


All times are GMT -5. The time now is 08:06.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi