Re: Victor motor contorls flashing orange
 

After a number of emails with the team I have now found that they have the basic drive back up and running again. The only problem is I don't know what was causing the problem in the first place so we haven't learned anything. At least the system is running again and they can move forward :)


Thanks to all for the good ideas for them to try.

Re: Victor motor contorls flashing orange
 

We've been having issues with out Victor 888s as well. After some research we found out that if you shave down the sides of the shroud of the PWM cables they will fit into the holes of the Victors. Our pins were not connecting to the inputs in the victor because the shroud is too big. Vex says that if you are having issues with the Victors than to shave down the sides of your PWM cables. Hope this helps, good luck!