Chief Delphi - pic: Team 166 on the pyramid

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Team 166 on the pyramid (http://www.chiefdelphi.com/forums/showthread.php?t=112871)

pic: Team 166 on the pyramid

Re: pic: Team 166 on the pyramid

Very nice. How much does it weigh?

Quote:

Originally Posted by JohnBoucher (Post 1228687)

Very nice. How much does it weigh?

We weighed it 2 days ago, we are at about 112 with our scoring mechanism mounted. Its probably gained a few pounds since then.

Re: pic: Team 166 on the pyramid

Is that a 20 point hang?

Re: pic: Team 166 on the pyramid

Make sure to check your device with bumpers!
It's hard to tell from the photo what your final resting place would be. Make sure bumpers won't extend below that crucial plane!

Quote:

Originally Posted by CalTran (Post 1228726)

Is that a 20 point hang?

That is a picture of it on the second level for convenience, the ceiling gets in the way in our build room of us putting it all the way up. We designed to hang for 30 points.

Quote:

Originally Posted by commodoredl (Post 1228728)

Make sure to check your device with bumpers!
It's hard to tell from the photo what your final resting place would be. Make sure bumpers won't extend below that crucial plane!

At this time, we were testing out if when the robot is off and our lock doesn't engage for some reason whether or not we would fall down, there is enough reduction that we won't even if the robot has no power.