Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Front two motors will not wheels (http://www.chiefdelphi.com/forums/showthread.php?t=112907)

Reggie335 06-02-2013 17:29

Front two motors will not wheels
 
My front two motors will not move but my two rear motors will. I have programmed all 4 motors into FRC LabVIEW, i have made sure that all wires for each motors are in their right place, and both front motors will not move at all :( and we are using Jaguars

wilsonmw04 06-02-2013 17:34

Re: Front two motors will not wheels
 
a couple of things.

1. post your code if you can. It will help folks see what you are doing.

2. do all of the jags lights go solid when you enable the robot? IF they continue to blink, you have something wrong. It may be as simple as your PWM's are in backward.


Check. and get back to us :-)

Reggie335 06-02-2013 17:43

Re: Front two motors will not wheels
 
which code like my begin vi. teleop or all of it

wilsonmw04 06-02-2013 19:59

Re: Front two motors will not wheels
 
All of it.

lorem3k 06-02-2013 22:17

Re: Front two motors will not wheels
 
Make sure you have 12V of power going to the Digital Sidecar, not just 5V. We had a similar problem last year because we didn't give the Sidecar enough voltage.

inkspell4 06-02-2013 22:54

Quote:

Originally Posted by wilsonmw04 (Post 1229061)
All of it.

if you could post your begin.vi, teleop.vi and any others controlling the drive i think most of the problems if any could be found.

brrian27 06-02-2013 22:56

Re: Front two motors will not wheels
 
Put a voltmeter on the output terminals of the jags to see if they are working correctly. For us the jaguars go bad all the time. I'd recommend Victors in the future

JV2073 06-02-2013 23:28

Re: Front two motors will not wheels
 
1. Post the code if you can.
2. Check if all three lights on the digital slidecard is green. If its not then you are giving it 5V which should be for the camera.
3. If you are moving a motor see if its a solid color or if its still binking yellow. If its blinking then the PWM wires are backwards.
4.If its says error 44037 then the PMW is not even on the correct places because it cant read it.
5. Make sure to make a new project in LABVIEW and then test it to see if its a mechanical or program problem
6. Look at the code error in diagnosis and look them up to start fixing them.

If you need any more help, please ask. :cool:

Lil' Lavery 07-02-2013 09:24

Re: Front two motors will not wheels
 
How are the lights on the Jaguars behaving?


All times are GMT -5. The time now is 23:52.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi