Chief Delphi - Programming Vex Motor Controller 99

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- C/C++ (http://www.chiefdelphi.com/forums/forumdisplay.php?f=183)

- - Programming Vex Motor Controller 99 (http://www.chiefdelphi.com/forums/showthread.php?t=113034)

Arrowhead

08-02-2013 12:06

Programming Vex Motor Controller 99

So our team is using a small vex motor, and as a result we are using a vex motor controller 99 to control it. Can we get any help with how to program this?

RufflesRidge

08-02-2013 12:51

Re: Programming Vex Motor Controller 99

The input timing for the VEX 29 controller are very similar to the Victor. You should be able to use the Victor class.

Arrowhead

08-02-2013 12:52

Re: Programming Vex Motor Controller 99

Ok thanks, ill try it out in a sec

Arrowhead

08-02-2013 15:54

Re: Programming Vex Motor Controller 99

The victor class doesnt seem to be working

RufflesRidge

08-02-2013 15:55

Re: Programming Vex Motor Controller 99

Quote:

Originally Posted by Arrowhead (Post 1230037)

The victor class doesnt seem to be working

At all? Have you installed the servo jumper on the PWM port you have connected the controller to?

Arrowhead

08-02-2013 15:57

Re: Programming Vex Motor Controller 99

We havent done, that, we are currently looking around our electronics bin for a jumper

Arrowhead

08-02-2013 16:02

Re: Programming Vex Motor Controller 99

We found a jumper on a old digital sidecar, and now everything is working :D
thanks

All times are GMT -5. The time now is 12:55.