Chief Delphi - cRIO Imaging Tool Not Finding cRIO

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - cRIO Imaging Tool Not Finding cRIO (http://www.chiefdelphi.com/forums/showthread.php?t=113266)

DjMaddius

11-02-2013 16:03

cRIO Imaging Tool Not Finding cRIO

The imaging tool isn't finding the cRIO, however I can ftp into the crio still.. so I know all my network settings are correct. I'm using version 2013.1.10 for the imaging tool..

Mark McLeod

11-02-2013 16:09

Re: cRIO Imaging Tool Not Finding cRIO

The Imaging tool is fussy about extra network cards.
Try Disabling all NIC's except for the one you are using for the cRIO.

Gnome2013

11-02-2013 16:10

Re: cRIO Imaging Tool Not Finding cRIO

Try turning off your firewall.

DjMaddius

11-02-2013 16:13

Re: cRIO Imaging Tool Not Finding cRIO

Quote:

Originally Posted by Mark McLeod (Post 1231723)

The Imaging tool is fussy about extra network cards.
Try Disabling all NIC's except for the one you are using for the cRIO.

Doesn't seem to be working either :/ I'm running as administrator as well, no results. Wired directly to crio

EDIT::

Quote:

Originally Posted by Gnome2013 (Post 1231725)

Try turning off your firewall.

Still nada, completely disabled..

I'll try restarting the machine completely.

Alan Anderson

12-02-2013 00:01

Re: cRIO Imaging Tool Not Finding cRIO

Quote:

Originally Posted by DjMaddius (Post 1231718)

The imaging tool isn't finding the cRIO, however I can ftp into the crio still.. so I know all my network settings are correct.

The Imaging Tool is fussy about things that you'd never notice otherwise. Check the Advanced settings on your network card's IPV4 properties and make sure a second IP address isn't hiding there.

All times are GMT -5. The time now is 12:36.