Chief Delphi - pic: 1515 Teaser

Page 1 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: 1515 Teaser (http://www.chiefdelphi.com/forums/showthread.php?t=113455)

msimon785

13-02-2013 22:10

pic: 1515 Teaser

loading photo ...

Rob3653

13-02-2013 22:11

Re: pic: 1515 Teaser

10 point climber!

Gregor

13-02-2013 22:13

Re: pic: 1515 Teaser

Wedge to lower the bridge?

DampRobot

13-02-2013 22:14

Re: pic: 1515 Teaser

Quote:

Originally Posted by Gregor (Post 1233004)

Wedge to lower the bridge?

Definitely a minibot deployment alignment guide.

theawesome1730

13-02-2013 22:19

Re: pic: 1515 Teaser

What did you use to do the fillets like that? Is bead/sand blasted?

Akash Rastogi

13-02-2013 22:21

Re: pic: 1515 Teaser

Quote:

Originally Posted by theawesome1730 (Post 1233009)

What did you use to do the fillets like that? Is bead/sand blasted?

The edges may just look like that because it was jetted. The surface looks like it was sent through a Time-saver though.

Andrew Schreiber

13-02-2013 22:31

Re: pic: 1515 Teaser

Quote:

Originally Posted by DampRobot (Post 1233006)

Definitely a minibot deployment alignment guide.

Grabber for the mobile goals?

Botwoon

13-02-2013 22:40

Re: pic: 1515 Teaser

Is it okay for me to guess if I've already seen the part name? ;)

Whippet

13-02-2013 23:04

Re: pic: 1515 Teaser

Quote:

Originally Posted by Andrew Schreiber (Post 1233020)

Grabber for the mobile goals?

Obviously part of a trailer hitch.

Andrew Schreiber

13-02-2013 23:06

Re: pic: 1515 Teaser

wrong year ;)

Gregor

13-02-2013 23:17

Re: pic: 1515 Teaser

Quote:

Originally Posted by Andrew Schreiber (Post 1233039)

wrong year ;)

But the question is, who are you talking to? :rolleyes: We can't all be wrong.

Andrew Schreiber

13-02-2013 23:39

Re: pic: 1515 Teaser

Quote:

Originally Posted by Gregor (Post 1233046)

But the question is, who are you talking to? :rolleyes: We can't all be wrong.

I think all of us being wrong was the point of the exercise.

SenorZ

13-02-2013 23:53

Re: pic: 1515 Teaser

Well, if that isn't a triangle, then perspective tells me its WAY too long to fit in starting configuration.

I'm guessing its a truss for a small bridge that you're putting on your robot for Frisbees to safely cross into a goal.

theawesome1730

13-02-2013 23:57

Re: pic: 1515 Teaser

Quote:

Originally Posted by Akash Rastogi (Post 1233013)

The edges may just look like that because it was jetted. The surface looks like it was sent through a Time-saver though.

We water jet a lot of part but the edges don't end up looking like that. The are typically very rough and square.

msimon785

14-02-2013 00:55

Re: pic: 1515 Teaser

Those edges are actually from right off the waterjet. The finish is after a light application of a wire brush wheel. The apparent fillet is actually not a fillet; merely a discoloration. The edges are quite sharp. This happens on all our waterjet parts.

All times are GMT -5. The time now is 19:34.

Page 1 of 2

Show 100 post(s) from this thread on one page