Chief Delphi - What is the pan range on the Axis Camera servo?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - What is the pan range on the Axis Camera servo? (http://www.chiefdelphi.com/forums/showthread.php?t=113508)

Ganondalf

14-02-2013 19:14

What is the pan range on the Axis Camera servo?

1 Attachment(s)

I want the camera to face forward until a button is pressed. I just need to know the range so I can find the center. The tilt (Servo Motor) is working perfectly. The constants I currently have entered for Servo Motor 2 are jibberish placeholders. Thank you!

Ganondalf

14-02-2013 19:39

Re: What is the pan range on the Axis Camera servo?

should it be 0-90, 90-180.

ferret_guy

14-02-2013 19:49

also for a screen shot simply hit print screen, open paint, and paste.

Mark McLeod

14-02-2013 22:15

Re: What is the pan range on the Axis Camera servo?

Why don't you use the same ranges you chose for Servo Motor since that one works great?
90-0, 0-90
The total shouldn't be more than 180 and the minimum no less than 0.

Both servos have the same range.

All times are GMT -5. The time now is 12:11.