Chief Delphi - cRIO Modules

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - cRIO Modules (http://www.chiefdelphi.com/forums/showthread.php?t=113587)

robohuskies2574

15-02-2013 18:43

cRIO Modules

Our team is in need to change the default cRIO module locations in order for our intended plan to work, otherwise we have to slave away to move the locations of almost all of our electronics. For example, we want to move modules 9201 and 9403 from slots 1 and 2 to slots 7 and 8. Is it possible to change these modules' locations, if so how? Thanks.

By the way, we're using LabView.

ferret_guy

15-02-2013 18:45

I don't think so if I understand correctly it is encoded in the fpga for generating pwm and safety protocol implmanation

plnyyanks

15-02-2013 20:04

Re: cRIO Modules

Quote:

Originally Posted by robohuskies2574 (Post 1234026)

If you're using an 8 slot cRIO, you can define your components on (Analog/Digital/Solenoid) Module 2. You'll have to, however keep the same order of modules:
9201: Slot 1 or 5
9403: Slot 2 or 6
9472: Slot 3 or 7

Joe Ross

15-02-2013 20:28

Re: cRIO Modules

Quote:

Originally Posted by plnyyanks (Post 1234057)

Except that R71 requires the 9201 in slot 1 and R64 requires that the 9403 in slot 2.

DonRotolo

15-02-2013 22:19

Re: cRIO Modules

Quote:

Originally Posted by robohuskies2574 (Post 1234026)

Is it possible to change these modules' locations?

Possible? Probably. Allowed for competition? Sorry, no.

All times are GMT -5. The time now is 02:09.