Chief Delphi - Parts of robot failing?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Parts of robot failing? (http://www.chiefdelphi.com/forums/showthread.php?t=113685)

Team 4457

19-02-2013 19:52

Re: Parts of robot failing?

1 Attachment(s)

Here is the revised code.

FlusteredRookie

19-02-2013 21:18

Re: Parts of robot failing?

We are loosing air pressure in our pneumatic system really fast. We checked the connections but don't know what's wrong... Help?

cgmv123

19-02-2013 22:34

Re: Parts of robot failing?

Quote:

Originally Posted by FlusteredRookie (Post 1236744)

We are loosing air pressure in our pneumatic system really fast. We checked the connections but don't know what's wrong... Help?

Pneumatics leak. It's a fact of life. If you put small amounts of water over your connections, you may be able to see which one is leaking. Other than that, you just have to work around it.

Alan Anderson

20-02-2013 12:17

Re: Parts of robot failing?

Quote:

Originally Posted by Team 4457 (Post 1235810)

Here are the photos.

I don't see any lights. Was the power off when you took the pictures?

Your Analog Breakout is not connected to power. It'll need 12 volts from the PDB in order for it to be legal show the battery voltage on the Driver Station.

The connector that I assume should be going to the Analog Breakout is instead wedged in next to the Digital Sidecar power connector. That can't be a good thing.

All times are GMT -5. The time now is 19:13.

Page 2 of 2

Show 100 post(s) from this thread on one page