Chief Delphi - cRIO & Solenoids

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - cRIO & Solenoids (http://www.chiefdelphi.com/forums/showthread.php?t=113697)

C.I.S.

16-02-2013 18:42

cRIO & Solenoids

Do we need anything other than the cRIO to power 24v solenoid valves? In other words, do we need an additional converter, if so where to purchase in short order?

DonRotolo

16-02-2013 22:02

Re: cRIO & Solenoids

In addition to a cRio, you need a pneumatics module and breakout for the top of it. That is all. 24 volts comes from the power distribution board.

Bryce Klang

19-02-2013 09:13

Re: cRIO & Solenoids

no you don't need anything else, like someone already said all you need is a solenoid break out and then you wire it to the 24v slot on the power distribution this is located at the back of the the board (saying that the terminals are the front)

All times are GMT -5. The time now is 12:41.