![]() |
2 motors one jaguar
Hey CD,
Our team has two motors that will be used for the conveyor belt and we were wondering that if it is possible to have the two motors hooked up to one jaguar, because they both are on the same speed. Thanks |
Re: 2 motors one jaguar
Only if such is allowed for those motors. Check the Motors & Electrical sections of the rule manual.
This is allowed for certain motors, but not all. |
Re: 2 motors one jaguar
maybe
Table 4-4: Legal Power Regulating Device Use Electrical Load Jaguar, Victor, or Talon motor controller M3-RS390-12 M3-RS395-12 M5-RS545-12 M5-RS555-12 M7-RS775-12 262100-3030 262100-3040 ARA Window motors AE235100-0610 Up to 2 per controller *Multiple low-load, pneumatic solenoid valves or lights may be connected to a single relay module. This would allow one (1) relay module to drive multiple pneumatic actions or multiple lights. No other electrical load can be connected to a relay module used in this manner. R53 |
Re: 2 motors one jaguar
Two of the following can be used per controller:
am PG motor M3-RS390-12 M3-RS395-12 M5-RS545-12 M5-RS555-12 M7-RS775-12 262100-3030 262100-3040 ARA Window motors AE235100-0610 am-2235 |
Re: 2 motors one jaguar
Quote:
|
Re: 2 motors one jaguar
Quote:
|
Re: 2 motors one jaguar
Quote:
I hit the key too quickly... you guys are fast |
Re: 2 motors one jaguar
Quote:
|
Re: 2 motors one jaguar
Quote:
|
Re: 2 motors one jaguar
Quote:
I corrected it within 5 minutes of hitting the enter key by mistake... sorry to have bothered you .... |
Re: 2 motors one jaguar
According to Table 4.4
in R 52 The am-9012 cannot be connected two to a motor controller Please Read R52 in the manual |
| All times are GMT -5. The time now is 11:20. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi