Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)
-   -   Timeout issues (http://www.chiefdelphi.com/forums/showthread.php?t=113818)

-J.- 17-02-2013 22:06

Timeout issues
 
1 Attachment(s)
I've been having issues with the teleop system for my team's robot. The major problem is that setting the mode variable (which is loaded from the dashboard) to 2 causes a cascading series of watchdog failures. This could be, I believe, due to me pushing the amount of time used over its limit only when that happens. My coding style is bizarre (Teleop is dominated by one big formula node) and I am not the best at optimizing, so the problem is most likely pretty obvious. My project is attached.

Could somebody help?

ProgrammerMatt 18-02-2013 10:00

Re: Timeout issues
 
For some strange reason i cannot open the ZIP file.

Alan Anderson 18-02-2013 12:41

Re: Timeout issues
 
Can you describe the problem in more detail than "a cascading series of watchdog failures"? I don't see the watchdog enabled anywhere in your software.

It's very hard for me to read the mix of dataflow and procedural code that you've put together, but I don't see anything obvious in the Nugentmode 2 case that would take significant time.


All times are GMT -5. The time now is 21:09.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi