Chief Delphi - Motors won't initialize

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Motors won't initialize (http://www.chiefdelphi.com/forums/showthread.php?t=113860)

gusat

18-02-2013 13:11

Motors won't initialize

1 Attachment(s)

Our team is trying to use 6 jaguars but they don't work when initializing more than 4 at the Begin.vi, with 4 or less it Works. We already switched jaguars, and pwm outputs. Does anyone know why this might be happening?

Kevin Sevcik

18-02-2013 13:14

Re: Motors won't initialize

Do you have 12V power wired to your digital sidecar? Are the 6V and Bat LEDs on the sidecar bright green? The sidecar will barely work without 12V power, but too many PWMs connected to it and running will eventually make it fail without 12V powering it.

Mark McLeod

18-02-2013 13:15

Re: Motors won't initialize

12v power to the Digital Sidecar?
All three power status lights bright green?

gusat

18-02-2013 13:36

Re: Motors won't initialize

It worked!! :D Thanks Mark and Kevin :D

All times are GMT -5. The time now is 12:05.