Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)
-   -   Dlink troubleshooting (http://www.chiefdelphi.com/forums/showthread.php?t=114190)

Anupam Goli 22-02-2013 17:01

Dlink troubleshooting
 
Hey all,

We actually started getting our D-Link set up recently (yea, not the smartest move), and we've run into some issues. When powering up the device, the power light and the third light are solid blue for 2 seconds, and then both lights turn off, and the power light remains a solid orange. I've tried calling DLink technical support, and they hung up on me. We have a week 1 event and if at all possible. I'd like to avoid paying $130 for the router and overnight shipping. Any ideas?

Alan Anderson 22-02-2013 18:36

Re: Dlink troubleshooting
 
If the staff at the Palmetto Regional can't help you get your router working, you can expect to be able to borrow one from Spare Parts.

Anupam Goli 22-02-2013 18:55

Re: Dlink troubleshooting
 
For the time being, we found a store that has revB in stock and we will buy it from there. Thank you for responding, we'll take our FIRST issued router and ask the staff at Palmetto to take a look at it.

Alan Anderson 22-02-2013 19:03

Re: Dlink troubleshooting
 
Have you tried to log into the D-Link administration web interface? You might find it's something as simple as having to reload the firmware.

Anupam Goli 22-02-2013 20:08

Re: Dlink troubleshooting
 
i did that. I loaded the latest firmware from Dlink's website, but to no avail. I still got the red power light of death.

suj 22-02-2013 21:53

Re: Dlink troubleshooting
 
Sounds bad, have you tried a 30-30-30 reset? I actually soft bricked one of my personal linksys WRT54G and WRT310N routers in the past. My issues was due to loss of power during a firmware upgrade (not to mention a bad firmware in the first place). If you haven't tried it out yet and are desperate the following link my help you out. http://www.dd-wrt.ca/wiki/index.php/...et_or_30/30/30
Just a thought, this could be a bad idea if FIRST had loaded in a custom firmware, but I'm doubting that. ::rtm::


All times are GMT -5. The time now is 20:13.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi