Chief Delphi - pic: FRC 229 2013 Release

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: FRC 229 2013 Release (http://www.chiefdelphi.com/forums/showthread.php?t=114212)

O'Sancheski

23-02-2013 00:34

pic: FRC 229 2013 Release

loading photo ...

O'Sancheski

23-02-2013 00:35

Re: pic: FRC 229 2013 Release

Wasn't letting me put the link in the description so here is our release video that aired on Mike and Justin.

lynca

25-02-2013 12:35

Re: pic: FRC 229 2013 Release

Nice looking twins !

We are testing a similar configuration with 1:1 mini-cims and large 4-7/8" banebots wheels.

We are concerned about the mini-cims wearing out when the shaft is unsupported. Is your team supporting the mini-cim shafts or seen any problems with mini-cim wear and tear?

O'Sancheski

25-02-2013 14:00

Re: pic: FRC 229 2013 Release

Quote:

Originally Posted by lynca (Post 1240137)

We are currently running the wheel cantilevered with the output shaft. We may find that we want to support the shaft but during testing we fired over 500 shots with no problems found.

All times are GMT -5. The time now is 09:48.