Chief Delphi - 39 Tooth Gates Pulley CAD

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - 39 Tooth Gates Pulley CAD (http://www.chiefdelphi.com/forums/showthread.php?t=114666)

lemiant

05-03-2013 11:49

39 Tooth Gates Pulley CAD

Does anybody know where we can find an accurate CAD of the 39 tooth gates pulley that is currently out of stock on Andymark. We intend to print a set for our robot.

Cory	05-03-2013 11:55

Re: 39 Tooth Gates Pulley CAD

SDP-SI.com

lemiant

05-03-2013 12:04

Re: 39 Tooth Gates Pulley CAD

Quote:

Originally Posted by Cory (Post 1243918)

SDP-SI.com

Thanks for the tip. They only have a 40 tooth pulley, but we can print that instead.

Cory	05-03-2013 12:08

Re: 39 Tooth Gates Pulley CAD

Quote:

Originally Posted by lemiant (Post 1243927)

They only have a 40 tooth pulley. We can just print that I guess.

I didn't actually look for it first. My bad. Assumed they would have it.

Check out 3dcontentcentral. They might have it, or a pulley generator.

All times are GMT -5. The time now is 07:39.