talon rapidly flashing yellow
 

we recently finished hooking up the electronics on our practice robot and when we turn it on one talon flashes yellow very quickly. it is not connected to a pwm. using a multimeter the power flow appears to be stable but it may not be updating fast enough. does anyone have any idea whats going on?

Re: talon rapidly flashing yellow
 

http://www.crosstheroadelectronics.c...Manual_1_1.pdf

Re: talon rapidly flashing yellow
 

its not that kind of blinking. the talon blinks slowly in that state. currently its blinking very rapidly. i have done some testing and confirmed that the problem is on the talon.

Re: talon rapidly flashing yellow
 

Can you elaborate on what troubleshooting you've done?

Re: talon rapidly flashing yellow
 

weve tried with and without pwm connection, multiple different fuses and pd ports, different batteries, different power wires, and continuity tested the power wires. weve come to the conclusion that the talon must be broken.

Re: talon rapidly flashing yellow
 

PM Mike Copioli on this forum.

Re: talon rapidly flashing yellow
 

Hey this is sorta a thread revival, but we have a talon that, when enabled, has a red blink to it. It's the same blink to it that you would get if you're running the talon slow reverse. However, when we move the PWM to another talon, it goes solid yellow, as it should. Any answers?

Re: talon rapidly flashing yellow
 

If a speed controller doesn't output "neutral" when it's told to, the first thing to do is to calibrate it.

Re: talon rapidly flashing yellow
 

Calibrate your talon.

Re: talon rapidly flashing yellow
 

I figured it was uncalibrated.