Chief Delphi - pneumatic system Wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - pneumatic system Wiring (http://www.chiefdelphi.com/forums/showthread.php?t=114844)

Reggie335

10-03-2013 22:22

pneumatic system Wiring

How do we Wire our Pneumatic system?????

Pneumatic System Consist Of:
Two Double Solenoid, Festo series VUVG, 12 volt

Mark McLeod

10-03-2013 23:13

Re: pneumatic system Wiring

See if this helps any: Pneumatics Step-By-Step

Wildcats1378

11-03-2013 01:36

Re: pneumatic system Wiring

You wire each side of the solenoid into the Solenoid Breakout on the cRIO. The breakout must be powered using 24v, although I'm not entirely sure if that is necessary if you are using a 12v valve. Google "FRC Wiring Diagram" for a really neat diagram.

cgmv123

11-03-2013 11:43

Re: pneumatic system Wiring

Quote:

Originally Posted by Wildcats1378 (Post 1246353)

The breakout must be powered using 24v, although I'm not entirely sure if that is necessary if you are using a 12v valve.

The breakout can run on 12v just fine.

MrForbes

11-03-2013 11:56

Re: pneumatic system Wiring

Quote:

Originally Posted by cgmv123 (Post 1246466)

The breakout can run on 12v just fine.

...and you want to power it with the appropriate power source, for the solenoids you are using. 24v if you're using 24v solenoids, 12v if you're using 12v solenoids.

All times are GMT -5. The time now is 07:26.