unable to put code on cRIO
 

When I try to deploy my code on our Practice robot Netbeans says
"waiting for cRIO to reboot"
and it says that forever, does anyone know how i can fix this problem??? i'm using a 64-Bit Laptop and ever since i've been using it i've not been able to put code on our Practice robot..

Try to physically reboot the robot using the breaker when it comes up next time it will accomplish the same task that the program is trying and failing on to.

Re: unable to put code on cRIO
 

Make sure you're using the 32 bit JDK. 64 bit JDK won't work.

Re: unable to put code on cRIO
 

Did you recently reimage the cRIO? What firewall and antivirus are you using?

Re: unable to put code on cRIO
 

I've tried everyone's ideas and Netbeans is still telling me "Waiting for cRIO to reboot"

from "deploy" and down this is what it says..

"deploy:
[crio-configure] Configuration files not included in this version of the sdk
[crio-configure] Checking that crio is configured for Java
Host OS: Windows 7 6.1, 6.1
Host JVM: Java HotSpot(TM) Client VM 20.14-b01
Target IP: 10.3.12.2
Network interfaces on host:
Intel(R) 82579LM Gigabit Network Connection: address: 10.3.12.5 netmask: 255.255.255.255 or hidden by IPv6 address (due to Java on Windows Bug:6707289)
Connecting FTP @10.3.12.2
[crio-deploy] ./build/suite/image.suite -> 10.3.12.2
Sending local file image.suite
run:
Waiting for cRIO to reboot (1s)
Waiting for cRIO to reboot (2s)
Waiting for cRIO to reboot (3s)
Waiting for cRIO to reboot (4s)
Waiting for cRIO to reboot (5s)
Waiting for cRIO to reboot (6s)
Waiting for cRIO to reboot (7s)
Waiting for cRIO to reboot (8s)
Waiting for cRIO to reboot (9s)
Waiting for cRIO to reboot (10s)
Waiting for cRIO to reboot (11s)
Waiting for cRIO to reboot (12s)
Waiting for cRIO to reboot (13s)
Waiting for cRIO to reboot (14s)
Waiting for cRIO to reboot (15s) "

Re: unable to put code on cRIO
 

We had a similar problem with a laptop and found that it was the firewall settings. The student made an exception for the cRIO IP and it connected properly after that.

Re: unable to put code on cRIO
 

These IP addresses seem incorrect, unless you are deploying to team 312's robot. They should be configured to 10.38.44.2 and 10.38.44.5.

Re: unable to put code on cRIO
 

that's what our practice bots cRIO and radio was named